Fosroc

Work smarter when the heat is on

Lokfix E45T with extended working time

Lokfix E77 Lokfix E55 Lokfix E45T Lokfix E35

Added Grip

Fosroc have added Lokfix E77 to the range, a new epoxy with enhanced properties.

Lokfix E77 Lokfix E55 Lokfix E45T Lokfix E35

Hang your hat on it

For decades people have been depending on Fosroc Lokfix resins to provide long term fixings that you can rely on. Now we bring you the new generation of improved materials.

Lokfix E77 Lokfix E55 Lokfix E45T Lokfix E35

Standard to critical fixing made

easy with Lokfix E range

Fosroc has been producing high quality fixings for over 50 years. The Lokfix E range combines the industry trusted brand with a clean and easy approach to application. Lokfix E is accredited to the European Standards and comes with supporting design software to ensure that the correct product is in use every time.

New for 2022; Lokfix E77 a high performance epoxy with a design life of up to 100 years and Lokfix E45T, a vinylester resin for use in hot climates.

DESIGN

Fosroc's bespoke software will guide you through the design process

DESIGN

SPECIFY

Lokfix E products have industry leading accreditation and design life of 50 to 100 years.

SPECIFY

EASY MIX

Let the cartridge system do the mixing for you. No more mess!

EASY MIX

APPLY

Use a standard cartridge gun for most applications

APPLY

SUSTAINABILITY

Fosroc E range contains no styrenes and cartridges can be re-used.

SUSTAINABILITY
Lokfix E77
Lokfix E77

Lokfix E77

Pure Epoxy 3:1 Resin Anchor

Lokfix E77 is Fosroc’s solution for large and heavy duty anchoring into cracked and un-cracked concrete. It is also suitable to anchoring heavy duty rebar. It has industry leading strength and low partial safety factors with a design life tested up to 100 years. It may be used in dry, damp and flooded conditions. Comes with industry leading accreditation and design software.

Features
  • Longer working times for complex applications
  • C1 & C2 seismic resistance*
  • 100 year design life*
  • Fixings can be spaced closer together than mechanical anchors
  • Does not apply expansive force to the substrate
  • Resistant to a variety of chemicals
  • Low VOC
  • Tested with diamond drilled bore holes*
  • Temporary service temp tested to 72°C*
  • Enables fixings closer to edges than mechanical anchors
  • Fire rated up to 2 hours
  • Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
  • LEED compliant
  • Available with design software
Common Application
  • Accredited for use in dry, damp and flooded concrete substrates.*
  • Can be used with cracked and un-cracked concrete.
  • Anchoring of threaded rod fixings
  • Fixing of post installed reinforcement
  • Internal, external and submerged conditions
  • Can be applied to a wide variety of fixing sizes
  • For horizontal, vertical and overhead application
  • Anchoring of internal threaded rod sleeves

 * Always consult technical information for specific details

 

Data Sheet ETA - Fixings in Concrete ETA Post-Installed Rebar Safety Data Sheet
Lokfix E55S
Lokfix E55S

Lokfix E55

Styrene Free Vinylester Resin Anchor

Lokfix E55 is Fosroc’s solution for medium to heavy duty anchoring into cracked and un-cracked concrete and post installation of reinforcement. Also used in stone and masonry. Low temperature grade is available. Comes with industry leading accreditation and design software.

Features
  • Fast return to service
  • May be used with a good quality skeleton gun (300ml size)
  • C1 seismic resistance*
  • Does not apply expansive force to the substrate
  • Fixings can be spaced closer together than mechanical anchors
  • Enables fixings closer to edges than mechanical anchors
  • Resistant to a variety of chemicals.
  • Lov VOC
  • Fire rated up to 2 hours*
  • Temporary service temperature tested to 120C*
  • Performs over a wide variety of temperatures
  • Re-usable
  • Incorporated in DesignFix software
Common Application

For concrete (solid, porous and light), masonry and hollow bricks.

  • Accredited for use in dry, damp and flooded concrete substrates
  • Can be used with cracked concrete
  • Fixing of post installed reinforcement*
  • Anchoring of threaded rod fixings

For use in solid and hollow masonry

  • Anchoring of internal threaded rod sleeves
  • Internal, external and submerged conditions
  • Can be applied to almost any size of fixing
  • For horizontal, vertical and overhead application
  • Bonding and surface crack sealing applications

 * Always consult technical information for specific details

 

Data Sheet ETA Post-Installed Rebar Application Guide Concrete Application Guide Hollow Block Safety Data Sheet ETA Fixings in Concrete
Lokfix E45T
Lokfix E45T

Lokfix E45T

Styrene Free Vinylester Resin Anchor Tropical Grade

Lokfix E45T is Fosroc’s solution for medium duty anchoring, providing extended working times ideally suited to working in hot climates. It is used for anchoring into cracked concrete, un-cracked concrete and numerous masonry substates, it is also used for post installation for reinforcement. E45T comes with industry leading accreditation and design software.

Features
  • Set times optimised for hot weather working up to 45°C
  • May be used with a good quality skeleton gun (300ml size)
  • C1 & C2 seismic resistance*
  • Does not apply expansive force to the substrate
  • Fixings can be spaced closer together than mechanical anchors
  • Enables fixings closer to edges than mechanical anchors
  • Resistant to a variety of chemicals.
  • Low VOC
  • Temporary service temp tested to 80 °C*
  • Performs over a wide variety of temperatures
  • Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
  • Incorporated in DesignFix software
Common Application

For concrete (solid, porous and light), masonry and hollow bricks.

  • Accredited for use in dry, damp and flooded concrete substrates
  • Can be used with cracked concrete
  • Fixing of post installed reinforcement*
  • Anchoring of threaded rod fixings
  • For use in solid and hollow masonry
  • Internal, external and submerged conditions
  • Can be applied to multiple fixing sizes
  • For horizontal, vertical and overhead application
  • Bonding and surface crack sealing applications

 * Always consult technical information for specific details

 

Data Sheet ETA Fixings in Masonry ETA Fixings in Concrete ETA Post-Installed Rebar Safety Data Sheet
Lokfix E35
Lokfix E35

Lokfix E35

Styrene Free Polyester Resin Anchor

Lokfix E35 is Fosroc’s solution for light to medium anchoring fixings into un-cracked concrete, solid and hollow masonry substrates.

Features
  • Fast return to service
  • May be used with a good quality skeleton gun (300ml size)
  • No additional mixing equipment required
  • Fixings can be spaced closer together than mechanical anchors
  • Enables fixings closer to edges than mechanical anchors
  • Resistant to a variety of chemicals.
  • Low VOC
  • Does not apply expansive force to the substrate
  • Waterproof, protecting the fixing from corrosion
  • Re-usable
  • Performs over a wide variety of temperatures
  • High and low temperature grades available
Common Application
  • Accredited for use in dry, damp and flooded concrete substrates.
  • Anchoring of threaded rod fixings
  • Anchoring of internal threaded rod sleeves
  • For use in solid and hollow masonry
  • Internal, external and submerged conditions
  • Can be applied to almost any size of fixing
  • For horizontal, vertical and overhead application.
  • Bonding and surface crack sealing applications.

 * Always consult technical information for specific details



 

 

Data Sheet ETA Fixings in Masonry ETA Fixings in Concrete Application Guide Concrete Application Guide Hollow Block Safety Data Sheet

Software Download

Designfix software incorporating Lokfix E77, Lokfix E55 and Lokfix E45T is freely available to download. This enables fast and accurate design guidance in accordance with the European standards.

Software Download
Software Download
image

Your Design

Amend the design to meet your specific project, fixing requirements and loads.

image

Fast Guidance

Quick intuitive agreement for fixing sizes and product type.

image

From Us to You

Fosroc have enlisted DesignFix to provide the software free of charge to Fosroc customers. 

Product Comparison

Select the Lokfix product for you using our product comparator.

Lokfix E77

Lokfix E77

Pure Epoxy 3:1 Resin Anchor

Application Temperature Range
0°C to +40°C Fixings into Solid & Hollow Masonry
NO Threaded rod into solid concrete
YES Threaded rod into cracked concrete
YES Rebar into cracked & solid concrete
YES Post Installation of reinforcement
YES Fire tested
F120 Seismic tested
C1 & C2 VOC Class
A+ Dry, wet & flooded concrete
YES Use with skeleton gun
NO Design software assistance
YES Max tested design life
100 years
Lokfix E55S

Lokfix E55S

Styrene Free Vinylester Resin Anchor

Application Temperature Range
-10°C to +35°C Fixings into Solid & Hollow Masonry
YES Threaded rod into solid concrete
YES Threaded rod into cracked concrete
YES Rebar into cracked & solid concrete
YES Post Installation of reinforcement
YES Fire tested
F120 Seismic tested
C1 VOC Class
A+ Dry, wet & flooded concrete
YES Use with skeleton gun
YES Design software assistance
YES Max tested design life
50 years
Lokfix E55L

Lokfix E55L

Styrene Free Vinyl Ester Resin Anchor - Winter Grade

Application Temperature Range
-20°C to +10°C Fixings into Solid & Hollow Masonry
YES Threaded rod into solid concrete
YES Threaded rod into cracked concrete
YES Rebar into cracked & solid concrete
YES Post Installation of reinforcement
NO Fire tested
NO Seismic tested
C2 VOC Class
A+ Dry, wet & flooded concrete
YES Use with skeleton gun
YES Design software assistance
YES Max tested design life
50 years
Lokfix E45T

Lokfix E45T

Styrene Free Vinylester Resin Anchor Tropical Grade

Application Temperature Range
+10°C to +45°C Fixings into Solid & Hollow Masonry
YES Threaded rod into solid concrete
YES Threaded rod into cracked concrete
YES Rebar into cracked & solid concrete
YES Post Installation of reinforcement
YES Fire tested
NO Seismic tested
C1 & C2 VOC Class
A+ Dry, wet & flooded concrete
YES Use with skeleton gun
YES Design software assistance
YES Max tested design life
50 years
Lokfix E35

Lokfix E35

Styrene Free Polyester Resin Anchor

Application Temperature Range
L: -10°C to +30°C / S: -5°C to +40°C / T: 10°C to +45°C Fixings into Solid & Hollow Masonry
YES Threaded rod into solid concrete
YES Threaded rod into cracked concrete
NO Rebar into cracked & solid concrete
NO Post Installation of reinforcement
NO Fire tested
NO Seismic tested
NO VOC Class
A+ Dry, wet & flooded concrete
YES Use with skeleton gun
YES Design software assistance
NO Max tested design life
50 years

Lokfix Product Consumption

Quickly calculate the quantities you will need for your fixing.

*Theoretical consumption. Make allowance for product wastage

Results based in the data entered above:

Find your nearest Fosroc office

Get your free Lokfix quote

Whatever your enquiry, we’d love to hear from you.

I agree to the Fosroc Privacy and Cookies statement

Online Brochures

Delivering exceptional products worldwide

Brochure

Contact Fosroc

Whatever your enquiry, we'd love to hear from you.

Product Datasheet

Select your country to download datasheet

Product Safety Sheet

Select your country to download safety sheet

${ activeProduct.name }

${ activeProduct.quickViewModal.introduction }

${ feature.name }
View product

${ activeProduct.name }

Add notes...

Choose a Folder

Create New Folder

${ activeProduct.name }

Add notes...

Move Favourite