Acrylic polymer modified cementitious waterproofing coating for concrete and masonry surfaces.
Integral waterproofing admixtures for mortars screeds and renders.
Expanding and plasticising grout admixtures.
Polymer modified, cement based, floor levelling compounds.
Non-shrink high performance cementitious grout.
Non-shrink cementitious bearing grout for use at a wide variety of applications.
Epoxy resin free-flow grouts conforming to the requirements of BS EN1504-3 Class R4 and BS...
Low exotherm, epoxy resin free flow grout.
Creep resistant, high strength, epoxy resin grout.
High strength, epoxy resin grout.
Free flow, high strength, non-shrink, cementitous precision grout.
High performance cementitous grout.
Non-shrink cementitious precision grout.
Non-shrink cementitious grout for large thicknesses.
Free flow, high strength, rapid setting, cementitious grout.
Shrinkage compensated cementitious precision grout.
Heat resistant, high strength, non shrink, free flow, cementitious flow.
Shrinkage compensated, high early and ultimate strength cementitious grout for repairs, anchorages and board seals.
Thixotropic shrinkage compensated cementitious grout for repairs, anchorages and board seals.
Multi purpose cementitious grout.
Non-shrink free flow ultra high strength grout.
High efficiency polymer based film forming curing agent.
Polymer Emulsion Liquid Membrane Concrete Curing Compound.
High quality, resin based, concrete curing compound.
Water based concrete curing compound.
Air entraining admixture.
Water reducing admixture.
Retarding and water reducing admixture.
Retarding water reducing admixture.
High performance water reducing admixture.
High performance superplasticising admixture.
Hydrophobic admixture for reducing the water absorption of concrete.
Closed-cell polyethylene joint filler, back-up strips and cord.
Flexible intumescent sealants.
Flexible intumescent sealant for high movement situations.
Cross linked, non absorbent, closed cell, polyethylene joint filler.
Waterproofing and efflorescence control admixture for semi-dry concrete mixes.
Mix and place polyester resin anchoring grout.
Bitumen / runner latex damp proofing emulsion.
Flexible cementitious waterproof coating.
Cementitious waterproofing coating.
High chemical resistant protective coating.
Damp-tolerant, solvent free epoxy resin coating.
Solvent-free epoxy resin coating for water retaining and water excluding structures.
Low viscosity epoxy injection resin system.
Water based, epoxy resin floor and wall coating.
High performance epoxy resin floor coating.
Monolithic surface hardening compound.
Single component epoxy zinc primer.
One part, floor joint sealant.
Heavy duty epoxy urethane joint sealant.
Fast setting emergency patching mortar for concrete pavements and floors.
High performance reinstatement mortar for concrete pavements and floors conforming to the requirements of BS...
Spray applied, rapid cure 100% solids, pure polyurea elastomer waterproofing membrane and protective coating.
Surface retarder for pavements, construction joints, and exposed aggregate concrete applications.
Water based concrete surface retarder.
High performance waterproofing membrane for basements and structures.
Anti lime coating used in Proofex Cavitydrain installations.
High density polyethylene drained cavity former for waterproofing of substrate.
Pre-applied waterproofing membrane which mechanically bonds to poured concrete remaining in place if settlement of...
Pre or post applied bentonite waterproofing membrane with unique surface bentonite impregnation for impermeable lay...
Geocomposite HDPE drainage sheet with thermobonded polypropylene filter.
High performance, totally gas-impervious, reinforced membrane.
High performance epoxy resin waterproof grout.
Mould release agent.
Water based chemical mould release agent.
Polymer modified dry spray repair mortar conforming to the requirements of BS EN 1504-3 Class...
High performance medium concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class...
High performance lightweight concrete reinstatement mortar conforming to the requirements of BS EN 1504-3 Class...
High performance fibre reinforced lightweight concrete reinstatement mortar conforming to the requirements of BS EN...
High performance fibre reinforced medium weight mortar conforming to the requirements of BS EN 1504-2...
High performance fibre reinforced medium weight concrete reinstatement mortar conforming to the requirements of BS...
Single component structural grade polymer modified concrete reinstatement mortar.
Single component, free-flowing, low alkali micro concrete.
Single component free-flowing fibre modified micro-concrete.
Rapid setting cement-based, water-stopping mortars.
Single component structural grade polymer modified concrete reinstatement concrete.
Polymer and fibre modified reinstatement mortar.
Low density polymer and fibre modified reinstatement mortar.
Renderoc ST05 is a protective cementitious coating and levelling mortar for applications from feather edge...
Thixotropic repair mortar for application by spray or trowel.
A high performance concrete superplasticiser based on polycarboxylic technology.
A high early strength concrete superplasticiser based on polycarboxylic technology.
Centrally and externally placed PVC waterstops.
Centrally placed PVC waterstops.
Swellable waterstops for in-situ concrete.
Swellable waterstop for in-situ concrete.
Composite PVC and hydrophilic waterstop system for dual watertight security.
Multi-component, gun and pouring grade polysulfide sealant.